Features and Benefits:
- Anodized Aluminum Profiles
- Lift Masts
- Steel (Powder Coated Paint-Optional SS)
- Welded Base
- Handlebar-height Adjustable
- Power Pack Cover
- Standard swivel casters
- Standard length lift masts
- Foot operated kick brakes on rear casters
- Lift mast slip clutch on the down movement provides for safe load handling
- Current limiting (no limit switches) provide for load limiting and stops
- Totally enclosed lift mast w/ball screw for smooth up and down DC powered movement
- Electronic power pack utilizes quick exchange features allowing for multi-shift operation
- Detachable remote controller
- Provides the operator with control over load handling functions.
- Handlebar is adjustable by the operators to achieve ergonomic operation
- Highly maneuverable, light-weight (approximately 90-lbs) and easy to operate.
Introductory Offer:
Base Lifter $2,995.00 each (sized as noted)
Optional End-Effectors:
- Fixed Core Probe $626.00 each
- Platform $518.00 each
- Platform, "V" Block and Turntable $790.00
The LIFT-N-GO II™ Series lifter has increased capacity over the standard Lift-N-Go™ Series. The LIFT-N-GO II™ continues the tradition of providing for increased economical, safe, efficient, and ergonomic material handling solutions to assist you with your production needs.
The LIFT-N-GO II™ has a lift capacity of 90Kg (200-lbs) and provides for improved and expanded flexibility with a wider base and longer legs along with an improved electronic power pack to better fill your ergonomic lifting requirements.
The introductory offering is for the base lifter without end-effectors. Optional End-Effectors:
- Fixed core probe 14" long
- Platform-UHMW load platform (~20" wide x ~17-1/4" deep)
- Platform with removable "V" block and turntable
| Technical Specifications 200 HD Series: | |
|---|---|
| Lift Stroke: | 1550mm (56.7") |
| Total Height: | 1928mm (76") |
| Total Lift Height (Floor to top of Platform): | 1692mm (60.9") |
| Series: | 200 HD Series |
| Minimum Lift Height Standard | 158mm (6.2"), 108mm (4.25") |
| Lift Speed 200HD Series | 90mm/sec (3.5"/sec) |
| Length (w/o Platform) | 771mm (30.35") |
| Load Platform (Depth x Width) | 440mm (17.3") x 560mm (20") |
| Wheel Diameter (Front/Back) | 60mm (2.3")/100mm (3.9") |
| Maximum Load 200 HD Series | 90Kg (200-lbs) |
| Lifter Weight w/o End-Effector | 40Kg (90-lbs) |
| Battery Voltage | 24V |
| Battery Capacity | 7.2 AHr |
| Lifter Finish | Powder Coated Paint/Anodized |
The load platform can if needed, be mounted 110mm (4.3") higher on the mast yoke. If mounted this way, the platform top when lowered would be higher that the standard mounting height.
