RonI
Print Page

19000/19500 Series

Features and Technical Data:

  • Anodized Aluminum Profiles-
    • Intermediate Sections-Standard and custom lengths
    • Dual Masts-One Power/One Non-Powered for increased stability at extended heights
  • Steel (Powder Coated Paint-Optional SS)
    • Legs-Bolted to Intermediate
    • Handlebar-Height Adjustable
    • Power Pack Cover
  • Standard and custom leg configurations and heights-Swivel and fixed casters
  • Standard and custom length lift masts
  • Foot operated 3 position central brake system on rear casters
    • Brake, free wheeling and center lock (trailing)
  • Lift mast slip clutch on the down movement provides for safe load handling
  • Current limiting (no limit switches) provide for load limiting and stops
  • Totally enclosed lift mast w/ball screw for smooth up and down DC powered movement
  • Electronic power pack can be provided with either standard or heavy-duty batteries
    • Power packs are also exchangeable allowing for multi-shift operation
  • Detachable remote controller(Plug-in to Electronic Power Pack)
    • Provides the operator with control over load handling functions.
  • Handlebar is adjustable by the operators to achieve ergonomic operation

The 19000 Series LIFT-O-FLEX ergonomic lifter offers dynamic load handling characteristics for heavy load capacities. The 19000 series has a lift capacity of 350-lbs and the 19500 provides for a lift capacity of 500-lbs. Both models provide expanded flexibility in equipment selection to better fill your ergonomic lifting requirements.

The 19000 series lifters use many of the same basic lifter components. This allows for inter-changeability between lifters permitting the customer to satisfy ergonomic lifter requirements while maintaining the ability to adapt the lifter to meet the challenge of meeting tomorrow's lifter needs today without incurring the cost of complete replacement.

Available End-Effector

  • Expand-O-Turn®
  • Squeeze-O-Turn™
  • Lift-O-Turn™
  • Fixed Forks
  • Platform
  • Core Probe
  • Telescopic Mast
  • Vacuum
  • Custom
REQUEST INFO


Specifications

  • Floor to top of Mast (19000 Series):
    76.8”, 96.5”, 116.2"
  • Total Lift Stroke (19000 Series):
    54.1”, 73.8”, 93.2”
  • Floor to top of Mast (19500 Series):
    76.8”, 96.5”, 116.2"
  • Total Lift Stroke (19500 Series):
    49.7”, 66.7”, 89”
  • Minimum Lift Height:
    ~56mm (~2.2”)
  • Lift-Speed 19000 Series:
    ~100mm/sec (4”/sec)
  • Lift-Speed 19500 Series:
    ~50mm/sec (2”/sec)
  • Legs-Standard:
    Std Length 875mm (34.4”)-Long 1110mm (39.7”)-X-Long 1162mm (45.7”)
  • Legs-Low Profile:
    Std Length 1003mm (39.4”)-Long 1110mm (39.7”)
  • Legs-X-Low Profile:
    Std Length 900mm (35.4”)-Long 1110mm (39.7”)
  • Wheel Material:
    Polyurethane/Rubber
  • Wheel Diameter (Front/Back) Standard:
    125mm (5”)/150mm (5.9”)-Front Single Swivel
  • Wheel Diameter (Front/Back) Low built:
    82mm (3.2”)/150mm (5.9”)-Front Dual Swivel
  • Wheel Diameter (Front/Back)X-Low built:
    76mm (2.9”)/150mm (5.9”)-Front Fixed Castor
  • Width: Outside:
    Std-556mm (21.8”) Wide 680mm (26.7”) X-Wide 858mm (33.4”)
  • Noise level:
    >70dB(A)
  • Maximum Load 19000 Series:
    160Kg (350-lbs)
  • Maximum Load 19500 Series:
    225Kg (500-lbs)
  • Lifter Weight w/o End-Effector:
    90Kg (198-lbs)
  • Battery Type:
    Lead Gel Cell
  • Battery Voltage:
    24V, 2 Amp
  • Battery Capacity:
    7.2 AHr
  • Recharge Time:
    6-8 Hours
  • Finish:
    Powder Coated Paint/Anodized or Stainless Steel/Anodized


Downloads