RonI
Print Page

19500S (Auxiliary Non-Powered Mast) Series

Features and Technical Data:

  • Anodized Aluminum Profiles-
    • Intermediate Sections-Standard and custom lengths
    • Dual Masts-One Power/One Non-Powered for increased stability at extended heights
  • Steel (Powder Coated Paint-Optional SS)
    • Legs-Bolted to Intermediate
    • Handlebar-Height Adjustable
    • Power Pack Cover
  • Standard and custom leg configurations and heights-Swivel and fixed casters
  • Standard and custom length lift masts
  • Foot operated 3 position central brake system on rear casters
    • Brake, free wheeling and center lock (trailing)
  • Lift mast slip clutch on the down movement provides for safe load handling
  • Current limiting (no limit switches) provide for load limiting and stops
  • Totally enclosed lift mast w/ball screw for smooth up and down DC powered movement
  • Electronic power pack can be provided with either standard or heavy-duty batteries
    • Power packs are also exchangeable allowing for multi-shift operation
  • Detachable remote controller(Plug-in to Electronic Power Pack)
    • Provides the operator with control over load handling functions.
  • Handlebar is adjustable by the operators to achieve ergonomic operation

The 19500S (Auxiliary Non-Powered Mast) Series LIFT-O-FLEX ergonomic lifter offers dynamic load handling characteristics for heavy load capacities. The 19500S series has a lift capacity of 525-lbs. This product provides expanded flexibility in equipment selection to better fill your ergonomic lifting requirements.

The 19000 series lifters use many of the same basic lifter components. This allows for inter-changeability between lifters permitting the customer to satisfy ergonomic lifter requirements while maintaining the ability to adapt the lifter to meet the challenge of meeting tomorrow’s lifter needs today without incurring the cost of complete replacement.

Available End-Effector

  • Expand-O-Turn®
  • Squeeze-O-Turn™
  • Lift-O-Turn™
  • Fixed Forks
  • Platform
  • Core Probe
  • Telescopic Mast
  • Vacuum
  • Custom
REQUEST INFO


Specifications

  • Floor to top of Mast Standard Legs:
    78.8”, 98.5", 118.2"
  • Floor to top of Mast Low Profile Legs:
    76.8", 96.5”, 116.1"
  • Total Lift Stroke Standard Mast:
    54.1”, 73.8”, 93.2”
  • Total Lift Stroke HD Mast:
    49.7”, 66.7”, 89"
  • Minimum Lift Height:
    ~56mm (~2.2”)
  • Lift-Speed 19500 Series:
    ~50mm/sec (2”/sec)
  • Legs-Standard (Overall Length):
    Std Length 984mm (38.75”)-Long 1184mm (46.6”)-X-Long 1384mm (54.5")
  • Legs-X-Low Profile (Overall Length):
    Std Length 900mm (35.4”)-Long 1110mm (39.7”)
  • Wheel Material:
    Polyurethane/Rubber
  • Wheel Diameter (Front/Back) Standard:
    100mm (3.9”)/150mm (5.9”)-Front Single Swivel
  • Wheel Diameter (Front/Back) X-Low built:
    76mm (2.9”)/150mm (5.9”)-Front Fixed Castor
  • Width: Outside:
    Std-850mm (33.5”)
  • Noise level:
    >70dB(A)
  • Lifter Weight w/o End-Effector:
    ~105Kg (230-lbs)
  • Battery Type:
    Lead Gel Cell
  • Battery Voltage:
    24V, 2 Amp
  • Battery Capacity:
    7.2 AHr
  • Recharge Time:
    6-8 Hours
  • Lifter Finish:
    Powder Coated Paint/Anodized or Stainless Steel/Anodized


Downloads