93096 Series 19000 EEx d Explosion Proof Lifter
93096 Series 19000 EEx d Explosion Proof Lifter Designed for the 19000 Series Lifter
ATEX Compliant for European Zone 1 and US NEC 505 Zone 1 Hazardous Locations
The 19000 EEx d Series Explosion Proof lifter offersusers the flexibility to meet the demands of explosionproof material handling needs combined with ergonomiclifters. The lifter is self-contained and has ExplosionProof enclosures for the control panel, Power Pack(batteries) w/Charger along with motor(s) according tothe requirements as noted in the Certificates ofCompliance as noted below.
The battery compartment can be mounted permanently tothe lifter for charging outside the EX room or can bemounted with “quick disconnect” feature for charging ina neutral zone.
The 19000 EEx d series lifters are comprised of modulesthat allows for inter-changeability of components in orderto meet your ergonomic lifter requirements whilemaintaining the ability to adapt the lifter to meet thechallenge of meeting tomorrow’s lifter needs today.
The lifter can be provided with a variety of end-effectors for load handling. The lifter shown is equipped with a SQUEEZE-O-TURN? EEx d rated for 55 gallon drum handling. Also mounted is a weight scale for tare weight reconciliation.
Each lifter is comprised of modules for easy assembly. The legs are separate and mount to the intermediate sectionwith 8 bolts each side. Casters are mounted to the front and a single swivel caster at the rear. A foot operated rearcentral braking system is used on the lifter. The three (3) position braking system is used to enhance safety and lifterworkability. (Rear casters can be locked in trailing position for easy transport-independent swivel or locked forstationary positioning).
The intermediate section is provided with a lift motor for powering the mast slide for easy and safe movement up and down of the end-effector. The mast is totally enclosed and is provided with a ball screw for smooth up and down DC powered movement. A slip clutch on the down movement provides for safe load handling.
Certificates of Compliance:
Control Module – EN 50014: 1997 + A1…A2, En 50018:2000, Certificate EX II 2 G EEx d T6 or T5 or T4
Battery Compartment w/Charger – ATEX EX II 2 G D, EEx d Certificate KEMA 02 ATEX 2103
Motors – UL Listed for hazardous locations Class I-11, Group D-F-G, Operating Temperature 160° C
